Home/Other Conveyor/Belt Type Bucket Elevator

Belt Type Bucket Elevator

Key Features

  • Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feed back and excavating conditions when materials are lifted, so invalid power is little.
  • Wide lifting range, little requirement to the materials' type and property , it can lift not only general powder and granule materials, but also large abrasive materials. Sound seal and little circumstance pollution.
  • Good running reliability, advanced design principle and handling method assure reliability of whole machine running, non-fault time exceed 20 thousand hours.
  • Long service life, inflow feeding, non excavating with hopper and few extrusion and collision conditions between materials. There is little materials sprink during feeding and discharging so it reduce machinery abrasion.
Technical Parameters
bucket elevator picture two
bucket elevator picture two
bucket elevator picture three
bucket elevator picture three
bucket elevator picture six
bucket elevator picture six
bucket elevator picture one
bucket elevator picture one
bucket elevator
bucket elevator
silo bucket elevator
silo bucket elevator
silo bucket elevator picture
silo bucket elevator picture
silo bucket elevator one
silo bucket elevator one
bucket elevator working site picture
bucket elevator working site picture
bucket elevator working site picture one
bucket elevator working site picture one
bucket elevator working site one
bucket elevator working site one
belt bucket elevator
belt bucket elevator

Description

TH, HL bucket elevator is suitable for vertical transporting materials with larger abrasive powder, granular and small block, such as: coal, cement, stone, sand, clay, minerals, etc., because the traction mechanism is ring chain, it allows to delivery a higher temperature materials (material temperature does not exceed 250 ℃). General conveying height up to 40 meters. TH-type is designed and manufactured according to JB3926-85 "vertical bucket elevator" standard, should be priority applied, in addition to connecting dimensions outside, the chain, sprocket, tensioner device of HL bucket elevator are same as TH type.

Working principle

Hopper scoops up material from the below storage , along the conveyor belt or chain ascension to the top, bypassing the top wheel turned downward, and pours material into the receiving groove. Belt drive bucket elevator is generally used rubber belt which installs in the transmission roller on below or above and the modified roller on the above or below . Chain drive bucket elevator generally equipped with two parallel transmission chain, a pair of drive sprocket on the above or below, and a pair of modified sprocket on below or above. Bucket elevator is generally equipped with chassis, to prevent the dust everywhere.

Technical parameter

Note:
  • Bucket capacity is calculation bucket capacity , it is calculated by the filling coefficient 0.6.
  • TH type bucket elevator hopper purpose:
    Zh-- Middle deep bucket: conveying wet sticky materials, such as sugar, wet fine sand etc..
    Sh-- deep bucket: conveying dry powder and small pieces of material, such as cement, sand, coal, etc..
  • HL type bucket elevator hopper:
    Q-- shallow round hopper: conveying moisture, easy to agglomerate, difficult to throw material, such as wet sand, wet coal, etc.
    S-- deep round hopper:conveying dry, loose, easy to throw material, such as cement, coal, gravel etc.
    • * Note: We can customize the product according to your information

Send Us Your Questions

We are here to answer any questions you, Reach out to us and we'll respond as soon as we can.

formarrow

Say hello.

We would love to learn about your project.

formarrow