Belt conveyor belt deviation and slipping treatment

17-06-2019

　　Belt conveyor belt deviation and slipping treatment method

　　There are many reasons for deviation, and it needs to be treated differently according to different reasons.

　　First: Adjust the load roller set

　　Second: install the centering roller set

　　Third: adjustment of the tensioning belt The adjustment of the belt tensioning is a very important part of the belt conveyor's deviation adjustment.

　　Fourth: Adjusting the position of the driving roller and the reversing roller The adjustment of the driving roller and the reversing roller is an important part of the belt deviation adjustment.

　　Fifth: adjustment of the deviation of the two-way running belt conveyor

　　Belt slipping treatment:

　　First: Spiral tensioning or hydraulic tensioning belt conveyor slippage The tensioning stroke can be adjusted to increase the tensioning force when the belt tensioner is screwed or hydraulically tensioned. However, sometimes the tensioning stroke is not enough, the belt is permanently deformed, and the belt can be cut off for a while to re-vulcanize.

　　Second: the use of nylon belt or EP requires a longer tensioning stroke, and can be re-vulcanized or increased by a tensioning stroke when the stroke is insufficient. There are many reasons for deviation, and it needs to be treated differently according to different reasons.

　　Third: the weight of the belt is tightened. The belt conveyor of the belt conveyor is used. When the belt is slipping, the weight can be added to solve the problem. Add the belt to the belt without slipping. However, it should not be added too much to avoid the belt from being subjected to unnecessary excessive tension and reducing the service life of the belt.