Belt conveyors must be replaced in time for excessive deformation and wear overruns

20-08-2019

　　It is very important to strengthen the normal inspection and protection of the belt conveyor, extend the service life of the equipment, adhere to the equipment, and complete the safety of the equipment. Therefore, it is necessary to conduct systematic and useful work and work literacy training for operators, improve the work skills and work ethics of operators, effectively prevent accidents and improve the safety of equipment safety. jobs. For the belt conveyor conveyor chain, detailed inspections should be carried out on a regular basis and problems should be dealt with or replaced in a timely manner.

　　For less reliable links, excessive deformation and wear overruns must be replaced in time; after a period of work on the belt conveyor, the direction of the horizontal link and the linear link of the connecting chain can be changed to change the wear direction and extend the connection. The service life of the chain; timely adjust the tension of the conveyor chain to ensure the pre-tightening requirements of the chain; the spacing of the plates should meet the requirements of the equipment, and the short and damaged chain plates should be filled or replaced in time; the excessively worn power sprocket should be replaced in time to Prevent damage to other components and drive chains; Use the same length of chain when using the old chain. It is forbidden to use connecting chains of different lengths and connecting chains with weak breaking strength.

　　During the operation of the belt conveyor, suspended materials are prohibited, resulting in material accumulation and overload, and timely removal of large quantities of materials. The feeding place can increase the bulk and steel scrap selection equipment; the belt conveyor chain machine slot is small, timely processing foreign objects, preventing the chain; the root rough operation and frequent start to prevent full load and overload start.