The belt must be have tension with under normal working of belt conveyor

17-10-2019

　　Belt conveyor in under normal working the belt shall be tension and provided tension is a tensioning device. The so-called "tensioning" is the meaning of absorbing the elongation of the conveyor belt and providing tension to the conveyor belt.

　　The role of tension in stainless steel roller conveyor is as follows:

　　The belt conveyor ensures the belt tension is small and so it can meet satisfies the premise that the conveyor belt is drooped.

　　The belt conveyor allows the conveyor belt to have sufficient tension at the point of separation of the drive drum to meet the friction drive requirements of the drive drum.

　　The belt conveyor compensates for the stretching of the conveyor belt.

　　The belt conveyor satisfies the tension stroke required to transmit the elastic elongation caused by the tension.

　　After used three months, the reducer shall be empty its oil, then clean it with diesel and gasoline, then vent and add a new lubricant in the middle of the viewing window;

　　Every months ensure the lubricant is enough and the lubricant should be replaced at least once a year.

　　The lubricating oil should not be too much. Due to the heating of the belt conveyor, the motor load is too large, causing the motor maintenance switch to trip. As a result, the gear box is heated and the noise is generated. Increase, or the belt conveyor reducer is hanged and scrapped.